{"product_id":"wrxlink-v11-wrx11x","title":"WRXLink V11 - WRX11X","description":"\u003cp\u003eEasy to install. Affordable. Reliable.\u003c\/p\u003e\n\u003cp\u003eG4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis ECU fits inside the factory OEM enclosure. Installation of processing unit is a breeze, with no alteration of the factory wiring loom required for the models listed below. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDue to the amount of variation on this vehicle, please ensure you read the Configuration - Memo Text in PCLink.\u003c\/p\u003e\n\u003cp\u003eThis product supports the following models:\u003c\/p\u003e\n\u003cp\u003e2007-2014 WRX and WRX STI with GR\/GV\/GH\/GE chassis codes, for JDM\/AUDM\/SADM\/EURO markets, with turbocharged EJ20 or EJ25 engines.\u003c\/p\u003e\n\u003cp\u003e2008-2010 USDM models which have the common international Denso ECU Pinout**\u003c\/p\u003e\n\u003cp\u003e2015-2021 WRX STI with VAB\/VAF chassis codes, for JDM\/AUDM\/SADM\/EURO markets, with turbocharged EJ20 or EJ25 engines\u003c\/p\u003e\n\u003cp\u003e**Note: Refer to the supported models document below for more detail. 2011 and later USDM models are supported by our WRX11 USDM ECU\u003c\/p\u003e\n\u003cp\u003eTake a look at our supported models list to find out which models are supported and which are not. Alternatively, contact your LinkECU Reseller or our 24\/6 Tech Support Team.\u003c\/p\u003e\n\u003cp\u003eImportant Notes\u003c\/p\u003e\n\u003cp\u003ePlease check your connector matches the header in the listed photo before purchasing. \u003c\/p\u003e\n\u003cp\u003eThis ECU works for manual transmissions only.  \u003c\/p\u003e\n\u003cp\u003eAir temp sensor highly recommended. \u003c\/p\u003e\n\u003cp\u003eMost factory features are supported including DCCD, hill start assist, SI drive, cruise control, cam control \u0026amp; ABS supported. \u003c\/p\u003e\n\u003cp\u003eCheck the features tab for I\/O input \u0026amp; output expansion options.\u003c\/p\u003e\n\u003cp\u003eThe security\/immobiliser lamp may remain illuminated in some models\u003c\/p\u003e\n\u003cp\u003eNote: This Plug-in features a new 4 pin powered CAN connector and cannot use the old CANPCB cable for CAN connection. Use the CANJST4 (Link PN 101-0198) cable for connecting CAN devices. This new 4 pin port and cable provide not only the CAN connection, but also a protected 12V power supply and ground for powering the CAN devices. The power supply is protected by a self-resetting fuse rated at 3A continuous.\u003c\/p\u003e\n\u003cp\u003eBack\u003c\/p\u003e\n\u003cp\u003eG4X PlugIn Key Features (where applicable):\u003c\/p\u003e\n\u003cp\u003eUp to 6D fuel and ignition mapping \u003c\/p\u003e\n\u003cp\u003ePrecision closed loop cam control (four cam, independent control) \u003c\/p\u003e\n\u003cp\u003eSequential fuel delivery \u003c\/p\u003e\n\u003cp\u003eDigital triggering, all OEM patterns \u003c\/p\u003e\n\u003cp\u003eOEM idle hardware supported \u003c\/p\u003e\n\u003cp\u003e5D boost control with three switchable tables \u003c\/p\u003e\n\u003cp\u003eMotorsport features - antilag, launch, flat shift \u003c\/p\u003e\n\u003cp\u003eContinuous barometric correction (on board) \u003c\/p\u003e\n\u003cp\u003eCAN port \u003c\/p\u003e\n\u003cp\u003eQuickTune - automated fuel tuning \u003c\/p\u003e\n\u003cp\u003eIndividual cylinder correction \u003c\/p\u003e\n\u003cp\u003eUSB tuning cable included \u003c\/p\u003e\n\u003cp\u003eStats recording into on-board memory \u003c\/p\u003e\n\u003cp\u003eGear compensations for spark, boost and fuel \u003c\/p\u003e\n\u003cp\u003eReal time selectable dual fuel, ignition and boost maps \u003c\/p\u003e\n\u003cp\u003eSync and crank sensors can be a combination of Hall effect, variable reluctance or optical \u003c\/p\u003e\n\u003cp\u003eBoost control referenced to gear, speed or throttle position \u003c\/p\u003e\n\u003cp\u003e512 mega bytes data logging memory within storage unit \u003c\/p\u003e\n\u003cp\u003eStaged injection \u003c\/p\u003e\n\u003cp\u003eKnock with \"windowing\" \u003c\/p\u003e\n\u003cp\u003eI\/O Options:\u003c\/p\u003e\n\u003cp\u003eThe following expansion connector inputs\/outputs are provided:  \u003c\/p\u003e\n\u003cp\u003eExpansion connector 1   \u003c\/p\u003e\n\u003cp\u003ePin 1 Aux 16 \u003c\/p\u003e\n\u003cp\u003ePin 2 DI 11 \u003c\/p\u003e\n\u003cp\u003ePin 3 An Temp 4 \u003c\/p\u003e\n\u003cp\u003ePin 4 Knock 2 \u003c\/p\u003e\n\u003cp\u003ePin 5 Injector 6 \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAdd to Wishlist\u003c\/p\u003e\n\u003cp\u003eDetails\u003c\/p\u003e\n\u003cp\u003eEasy to install. Affordable. Reliable.G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from...\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cp\u003eG4X PlugIn Key Features (where applicable):Up to 6D fuel and ignition mapping Precision closed loop cam control (four cam, independent control) Sequen...\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications\u003c\/p\u003e\n\u003cp\u003eClick here to download the full Specifications PDF.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eBack\u003c\/p\u003e\n\u003cp\u003eEasy to install. Affordable. Reliable.\u003c\/p\u003e\n\u003cp\u003eG4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis ECU fits inside the factory OEM enclosure. Installation of processing unit is a breeze, with no alteration of the factory wiring loom required for the models listed below. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDue to the amount of variation on this vehicle, please ensure you read the Configuration - Memo Text in PCLink.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis product supports the following models:\u003c\/p\u003e\n\u003cp\u003e2007-2014 WRX and WRX STI with GR\/GV\/GH\/GE chassis codes, for JDM\/AUDM\/SADM\/EURO markets, with turbocharged EJ20 or EJ25 engines.\u003c\/p\u003e\n\u003cp\u003e2008-2010 USDM models which have the common international Denso ECU Pinout**\u003c\/p\u003e\n\u003cp\u003e2015-2021 WRX STI with VAB\/VAF chassis codes, for JDM\/AUDM\/SADM\/EURO markets, with turbocharged EJ20 or EJ25 engines\u003c\/p\u003e\n\u003cp\u003e**Note: Refer to the supported models document below for more detail. 2011 and later USDM models are supported by our WRX11 USDM ECU\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTake a look at our supported models list to find out which models are supported and which are not. Alternatively, contact your LinkECU Reseller or our 24\/6 Tech Support Team.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eImportant Notes\u003c\/p\u003e\n\u003cp\u003ePlease check your connector matches the header in the listed photo before purchasing. \u003c\/p\u003e\n\u003cp\u003eThis ECU works for manual transmissions only.  \u003c\/p\u003e\n\u003cp\u003eAir temp sensor highly recommended. \u003c\/p\u003e\n\u003cp\u003eMost factory features are supported including DCCD, hill start assist, SI drive, cruise control, cam control \u0026amp; ABS supported. \u003c\/p\u003e\n\u003cp\u003eCheck the features tab for I\/O input \u0026amp; output expansion options.\u003c\/p\u003e\n\u003cp\u003eThe security\/immobiliser lamp may remain illuminated in some models\u003c\/p\u003e\n\u003cp\u003eNote: This Plug-in features a new 4 pin powered CAN connector and cannot use the old CANPCB cable for CAN connection. Use the CANJST4 (Link PN 101-0198) cable for connecting CAN devices. This new 4 pin port and cable provide not only the CAN connection, but also a protected 12V power supply and ground for powering the CAN devices. The power supply is protected by a self-resetting fuse rated at 3A continuous.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eG4X PlugIn Key Features (where applicable):\u003c\/p\u003e\n\u003cp\u003eUp to 6D fuel and ignition mapping \u003c\/p\u003e\n\u003cp\u003ePrecision closed loop cam control (four cam, independent control) \u003c\/p\u003e\n\u003cp\u003eSequential fuel delivery \u003c\/p\u003e\n\u003cp\u003eDigital triggering, all OEM patterns \u003c\/p\u003e\n\u003cp\u003eOEM idle hardware supported \u003c\/p\u003e\n\u003cp\u003e5D boost control with three switchable tables \u003c\/p\u003e\n\u003cp\u003eMotorsport features - antilag, launch, flat shift \u003c\/p\u003e\n\u003cp\u003eContinuous barometric correction (on board) \u003c\/p\u003e\n\u003cp\u003eCAN port \u003c\/p\u003e\n\u003cp\u003eQuickTune - automated fuel tuning \u003c\/p\u003e\n\u003cp\u003eIndividual cylinder correction \u003c\/p\u003e\n\u003cp\u003eUSB tuning cable included \u003c\/p\u003e\n\u003cp\u003eStats recording into on-board memory \u003c\/p\u003e\n\u003cp\u003eGear compensations for spark, boost and fuel \u003c\/p\u003e\n\u003cp\u003eReal time selectable dual fuel, ignition and boost maps \u003c\/p\u003e\n\u003cp\u003eSync and crank sensors can be a combination of Hall effect, variable reluctance or optical \u003c\/p\u003e\n\u003cp\u003eBoost control referenced to gear, speed or throttle position \u003c\/p\u003e\n\u003cp\u003e512 mega bytes data logging memory within storage unit \u003c\/p\u003e\n\u003cp\u003eStaged injection \u003c\/p\u003e\n\u003cp\u003eKnock with \"windowing\" \u003c\/p\u003e\n\u003cp\u003eI\/O Options:\u003c\/p\u003e\n\u003cp\u003eThe following expansion connector inputs\/outputs are provided:  \u003c\/p\u003e\n\u003cp\u003eExpansion connector 1   \u003c\/p\u003e\n\u003cp\u003ePin 1 Aux 16 \u003c\/p\u003e\n\u003cp\u003ePin 2 DI 11 \u003c\/p\u003e\n\u003cp\u003ePin 3 An Temp 4 \u003c\/p\u003e\n\u003cp\u003ePin 4 Knock 2 \u003c\/p\u003e\n\u003cp\u003ePin 5 Injector 6 \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Motors","offers":[{"title":"Default Title","offer_id":51347704414525,"sku":"238-4000","price":7300.0,"currency_code":"SAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/6523\/6797\/files\/rn-image_picker_lib_temp_1abc9a6c-7759-46d1-b221-85cc168aa0ec.webp?v=1770019698","url":"https:\/\/motors.com.sa\/products\/wrxlink-v11-wrx11x","provider":"Motors","version":"1.0","type":"link"}