تصنيف حسب:
1.15 Bar MAP Sensor (MAP1.15)
A 1.15 bar manifold absolute pressure (MAP) sensor for boost/vacuum measurement, wired directly into a Link ECU.
10m 4 Core CAN Wiring
A pre-terminated wiring loom/harness (101-0312) for connecting a Link ECU to the vehicle or to extend/adapt an existing installation.
140 Bar Pressure Sensor (HPS)
A pressure sensor (101-0186) for monitoring oil, fuel, or other system pressures, wired as an analogue input to a Link ECU.
2.5 Bar MAP Sensor (MAP2.5)
A 2.5 bar manifold absolute pressure (MAP) sensor for boost/vacuum measurement, wired directly into a Link ECU.
3 Bar MAP Sensor (MAP3)
A 3 bar manifold absolute pressure (MAP) sensor for boost/vacuum measurement, wired directly into a Link ECU.
300ZLink - N300X
A Link Plug-In ECU engineered as a direct, no-wiring-modification replacement for the factory engine computer on the Nissan 300ZX. It fits the OEM mounting location and connector, uses the same...
350ZLink - N350X
A Link Plug-In ECU engineered as a direct, no-wiring-modification replacement for the factory engine computer on the Nissan 350Z / Skyline V35. It fits the OEM mounting location and connector,...
4 x Exhaust Gas Temperature Probe Bundle (EGTs)
A weld-in or bung-mounted exhaust gas temperature (EGT) thermocouple probe for monitoring individual cylinder or collector exhaust temperatures.
5 Bar MAP Sensor EU (MAP5EU)
A 5 bar manifold absolute pressure (MAP) sensor for boost/vacuum measurement, wired directly into a Link ECU.
6 x Exhaust Gas Temperature Probe Bundle (EGTs)
A weld-in or bung-mounted exhaust gas temperature (EGT) thermocouple probe for monitoring individual cylinder or collector exhaust temperatures.
8 Bar MAP Sensor EU (MAP8EU)
A 8 bar manifold absolute pressure (MAP) sensor for boost/vacuum measurement, wired directly into a Link ECU.
8 Bar MAP Sensor EU (MAP8EU) - New Enclosure
A 8 bar manifold absolute pressure (MAP) sensor for boost/vacuum measurement, wired directly into a Link ECU.
8 x Exhaust Gas Temperature Probe Bundle (EGTs)
A weld-in or bung-mounted exhaust gas temperature (EGT) thermocouple probe for monitoring individual cylinder or collector exhaust temperatures.
A Loom Long (5LA)
A pre-terminated wiring loom/harness (101-0008) for connecting a Link ECU to the vehicle or to extend/adapt an existing installation.
A Loom Medium (2LA)
A pre-terminated wiring loom/harness (101-0005) for connecting a Link ECU to the vehicle or to extend/adapt an existing installation.
A Loom short (0LA)
A pre-terminated wiring loom/harness (101-0002) for connecting a Link ECU to the vehicle or to extend/adapt an existing installation.
Adapter M10 x 1 Female to 1/8 BSP Male
A thread adapter (101-0199) allowing an M10x1 sensor to be fitted into a different thread size port.
Adapter M10 x 1 Female to 1/8 NPT Male
A thread adapter (101-0193) allowing an M10x1 sensor to be fitted into a different thread size port.
AIM GPS09 Module for AIM Dashes
A GPS receiver module for AIM-based Link dash displays, adding position, speed and lap-timing data logging.
Air Temp Sensor (IAT1-8)
An air intake temperature (IAT) sensor for monitoring incoming air charge temperature, wired into a Link ECU.