Skip to content
Sort by:
AEM EV 600A HV Maintenance Switch
Hermetically sealed and gas filled. Intrinsically safe with industry leading dielectric performance.
AEM EV Contactor 350A/900V
Hermetically sealed with gas fill. Integrated coil economizer to reduce coil holding power. Meets RoHS 2011/65/EU.
AEM EV Pre Charge Relay
Low-cost pre-charge solution that meets RoHS 2011/65/EU. PCB mountable.
AEM EV Tesla Sport Large Drive Unit Control Board (For Sport LDU Swaps Only)
AEM EV's Tesla Inverter Control Board acts as a VCU expansion device that replaces the stock Tesla ICB. Once connected to an AEM VCU using the supplied communications harness, calibrators...
AEM EV Unsealed Battery Management System Satellite Module for VCU
The VCU communicates with the BMS via the Master Module and all battery packs need at least one Master unit. The Satellites expand the capability of the Master by an...
AEM EV Battery Management System Mini Master Module For VCU
The VCU communicates with the BMS via the Mini Master Module and all battery packs need at least one Mini Master unit. The Satellites expand the capability of the Master...
AEM EV CCU Kit
The AEM EV Combined Charging Unit (CCU) combines both an On-Board Charger (OBC) and a DC-DC Converter (DCDC). The OBC charges the HV Battery Pack by taking 120v or 240v...
AEM EV SDU Controller Kit
AEM EV's Tesla Inverter Control Board acts as a VCU expansion device that replaces the stock Tesla ICB. Once connected to an AEM VCU using the supplied communications harness, calibrators...
AEM Battery Management System Satellite (MUST BE USED WITH MASTER - 18 Cell Taps)
The VCU communicates with the BMS via the Master Module and all battery packs need at least one Master unit. The Satellite Modules are connected to their Master via a...
AEM Battery Management System Master (MUST BE USED WITH AEM VCU - 18 Cell Taps)
The VCU communicates with the BMS via the Master Module and all battery packs need at least one Master unit. The Satellites expand the capability of the Master by an...
AEM EV 8 Button Keypad CAN Based Programmable Backlighting
More than just aesthetics though, the backlighting is used to alert you to any potential issues and whether everything is functioning properly to keep you safe. For instance, when the...
AEM EV VCU300 Programmable Vehicle Control Unit 196-pin Connector 3 CAN 4-Motor Control
AEM EV Vehicle Control Units (VCUs) are the missing link for high-performance EV street-conversion and motorsports applications. They allow the calibrator to create customized torque management strategies applicable to a...
AEM EV CCU Plug & Pin Kit - HVDC Output (For AEM EV CCU aem30-8405)
AEM EV CCU Plug & Pin Kit - HVDC Output (For AEM EV CCU aem30-8405)
AEM EV AC Input Connect for AEM EV CCU aem30-8405
AEM EV AC Input Connect for AEM EV CCU aem30-8405
Replacement Connector Kit For BMS aem30-8401M and aem30-8401S
Replacement Connector Kit For BMS aem30-8401M and aem30-8401S
AEM EV Plug & Pin Kit for PDU-8
· Includes dummy plugs for unused pin location to retain weather tight seal
AEM Wiring Harness for V2 Controller w/ Multi Input
Wiring Harness for V2 Water/Methanol injection Controller with Multi Input Features
AEM Single K-Type Thermocouple Kit - 4 Pack
AEM's RTD-Type Temperature Sensor (PN 30-2052) is packed with features that deliver consistent measurement and long life. This AEM EGT Sensor features a closed-tip design that lasts longer than the...
AEM Main Harness for X-Series Temp Gauge (30-0302)
· Long length wiring loom to accommodate most applications
VAT: 302055452400003
