AEM

switch may be used to initiate logging. Unit connector is a DTM12 with a short flying lead terminated in a Type 100% User Programmable CAN Logger aimed at performance automotive...

The AEM EV Combined Charging Unit (CCU) combines both an On-Board Charger (OBC) and a DC-DC Converter (DCDC). The OBC charges the HV Battery Pack by taking 120v or 240v...

Hermetically sealed with gas fill. Integrated coil economizer to reduce coil holding power. Meets RoHS 2011/65/EU. Integrated coil economizer to reduce coil holding power Hermetic seal with gas fill IEC60947-4-1...

Includes dummy plugs for unused pin location to retain weather tight seal Includes dummy plugs for unused pin location to retain weather tight seal All hardware included to help ease...

Multiple pins to allow for easy customization Multiple pins to allow for easy customization Weatherproof seals to keep contaminants out Quick-connect connectors Waterproof connectors

Replacement connector kit for VCU300 #30-8100 Multiple pins to allow for easy customization Weatherproof seals to ensure a tight seal Quick connect connectors Waterproof connectors

AEM EV's Tesla Inverter Control Board acts as a VCU expansion device that replaces the stock Tesla ICB. Once connected to an AEM VCU using the supplied communications harness, calibrators...

AEM EV's Tesla Inverter Control Board acts as a VCU expansion device that replaces the stock Tesla ICB. Once connected to an AEM VCU using the supplied communications harness, calibrators...

AEM EV's Tesla Inverter Control Board acts as a VCU expansion device that replaces the stock Tesla ICB. Once connected to an AEM VCU using the supplied communications harness, calibrators...

The VCU communicates with the BMS via the Master Module and all battery packs need at least one Master unit. The Satellites expand the capability of the Master by an...

Supplied with PCB Connector, Terminals and Wiring leads Included 2 x 10’ Milspec Iso leads Included 25 x 36” Tap leads Included PCB connector Save time crimping

This low voltage harness assembly was designed to be installed in the front half of the electric vehicle. It was designed to be used with a mating rear half assembly...

AEM EV Vehicle Control Units (VCUs) are the missing link for high-performance EV street-conversion and motorsports applications. They allow the calibrator to create customized torque management strategies applicable to a...

AEM replacement parts for its adjustable fuel pressure regulators include a rebuild kit that includes a diaphragm, interchangeable discharge ports and O-ring, vacuum fitting and multiple barb fitting types. Common...

Replacement threaded barb vacuum fitting for AEM adjustable fuel pressure regulators - other rebuild parts are available (sold separately). Use with AEM fuel pressure regulator - Fuel pressure regulator sold...

AEM High Volume Fuel Rail replacement parts include aluminum crush washers, fuel rail O-rings, adjustable fuel pressure regulator O-rings, banjo fittings, and fuel rail plugs. Fits fuel rails with -6AN...

10Hz Replacement GPS Antenna for use with AEM GPS-enabled Devices (GPS Speedometer,CD-5 Carbon Digital Dash Display, Vehicle Dynamics Module and GPS Module) Compatible with VDM (Vehicle Dynamics Module) and GPS...