Skip to content
WRXLink V11 - WRX11X
Price excluding customs duties and tax.
Easy to install. Affordable. Reliable.
G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.
This ECU fits inside the factory OEM enclosure. Installation of processing unit is a breeze, with no alteration of the factory wiring loom required for the models listed below.
Due to the amount of variation on this vehicle, please ensure you read the Configuration - Memo Text in PCLink.
This product supports the following models:
2007-2014 WRX and WRX STI with GR/GV/GH/GE chassis codes, for JDM/AUDM/SADM/EURO markets, with turbocharged EJ20 or EJ25 engines.
2008-2010 USDM models which have the common international Denso ECU Pinout**
2015-2021 WRX STI with VAB/VAF chassis codes, for JDM/AUDM/SADM/EURO markets, with turbocharged EJ20 or EJ25 engines
**Note: Refer to the supported models document below for more detail. 2011 and later USDM models are supported by our WRX11 USDM ECU
Take a look at our supported models list to find out which models are supported and which are not. Alternatively, contact your LinkECU Reseller or our 24/6 Tech Support Team.
Important Notes
Please check your connector matches the header in the listed photo before purchasing.
This ECU works for manual transmissions only.
Air temp sensor highly recommended.
Most factory features are supported including DCCD, hill start assist, SI drive, cruise control, cam control & ABS supported.
Check the features tab for I/O input & output expansion options.
The security/immobiliser lamp may remain illuminated in some models
Note: This Plug-in features a new 4 pin powered CAN connector and cannot use the old CANPCB cable for CAN connection. Use the CANJST4 (Link PN 101-0198) cable for connecting CAN devices. This new 4 pin port and cable provide not only the CAN connection, but also a protected 12V power supply and ground for powering the CAN devices. The power supply is protected by a self-resetting fuse rated at 3A continuous.
Back
G4X PlugIn Key Features (where applicable):
Up to 6D fuel and ignition mapping
Precision closed loop cam control (four cam, independent control)
Sequential fuel delivery
Digital triggering, all OEM patterns
OEM idle hardware supported
5D boost control with three switchable tables
Motorsport features - antilag, launch, flat shift
Continuous barometric correction (on board)
CAN port
QuickTune - automated fuel tuning
Individual cylinder correction
USB tuning cable included
Stats recording into on-board memory
Gear compensations for spark, boost and fuel
Real time selectable dual fuel, ignition and boost maps
Sync and crank sensors can be a combination of Hall effect, variable reluctance or optical
Boost control referenced to gear, speed or throttle position
512 mega bytes data logging memory within storage unit
Staged injection
Knock with "windowing"
I/O Options:
The following expansion connector inputs/outputs are provided:
Expansion connector 1
Pin 1 Aux 16
Pin 2 DI 11
Pin 3 An Temp 4
Pin 4 Knock 2
Pin 5 Injector 6
Add to Wishlist
Details
Easy to install. Affordable. Reliable.G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from...
Features
G4X PlugIn Key Features (where applicable):Up to 6D fuel and ignition mapping Precision closed loop cam control (four cam, independent control) Sequen...
Specifications
Click here to download the full Specifications PDF.
Back
Easy to install. Affordable. Reliable.
G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.
This ECU fits inside the factory OEM enclosure. Installation of processing unit is a breeze, with no alteration of the factory wiring loom required for the models listed below.
Due to the amount of variation on this vehicle, please ensure you read the Configuration - Memo Text in PCLink.
This product supports the following models:
2007-2014 WRX and WRX STI with GR/GV/GH/GE chassis codes, for JDM/AUDM/SADM/EURO markets, with turbocharged EJ20 or EJ25 engines.
2008-2010 USDM models which have the common international Denso ECU Pinout**
2015-2021 WRX STI with VAB/VAF chassis codes, for JDM/AUDM/SADM/EURO markets, with turbocharged EJ20 or EJ25 engines
**Note: Refer to the supported models document below for more detail. 2011 and later USDM models are supported by our WRX11 USDM ECU
Take a look at our supported models list to find out which models are supported and which are not. Alternatively, contact your LinkECU Reseller or our 24/6 Tech Support Team.
Important Notes
Please check your connector matches the header in the listed photo before purchasing.
This ECU works for manual transmissions only.
Air temp sensor highly recommended.
Most factory features are supported including DCCD, hill start assist, SI drive, cruise control, cam control & ABS supported.
Check the features tab for I/O input & output expansion options.
The security/immobiliser lamp may remain illuminated in some models
Note: This Plug-in features a new 4 pin powered CAN connector and cannot use the old CANPCB cable for CAN connection. Use the CANJST4 (Link PN 101-0198) cable for connecting CAN devices. This new 4 pin port and cable provide not only the CAN connection, but also a protected 12V power supply and ground for powering the CAN devices. The power supply is protected by a self-resetting fuse rated at 3A continuous.
G4X PlugIn Key Features (where applicable):
Up to 6D fuel and ignition mapping
Precision closed loop cam control (four cam, independent control)
Sequential fuel delivery
Digital triggering, all OEM patterns
OEM idle hardware supported
5D boost control with three switchable tables
Motorsport features - antilag, launch, flat shift
Continuous barometric correction (on board)
CAN port
QuickTune - automated fuel tuning
Individual cylinder correction
USB tuning cable included
Stats recording into on-board memory
Gear compensations for spark, boost and fuel
Real time selectable dual fuel, ignition and boost maps
Sync and crank sensors can be a combination of Hall effect, variable reluctance or optical
Boost control referenced to gear, speed or throttle position
512 mega bytes data logging memory within storage unit
Staged injection
Knock with "windowing"
I/O Options:
The following expansion connector inputs/outputs are provided:
Expansion connector 1
Pin 1 Aux 16
Pin 2 DI 11
Pin 3 An Temp 4
Pin 4 Knock 2
Pin 5 Injector 6
We understand how important it is for you to receive your products in a timely and efficient manner. Therefore, we have outlined our shipping policy below to provide clarity and transparency:
1. Order Processing Time:
- We strive to process all orders within 1-3 business days after receiving payment confirmation.
- Please note that processing time may be slightly longer during peak seasons and holidays.
2. Shipping Methods and Carriers:
- We work with a variety of trusted shipping carriers to ensure reliable delivery, including but not limited to UPS, FedEx and DHL.
- The specific carrier and shipping method for your order will depend on various factors such as destination, package weight, and shipping speed.
3. Shipping Time:
- Once your order has been processed and shipped, the estimated delivery time will depend on the destination and shipping method chosen.
- On average, our customers receive their orders within 7-14 business days.
- Please note that some remote locations or international destinations may require longer delivery times.
4. Tracking Information:
- To keep you informed about the progress of your order, we will provide tracking information as soon as it becomes available.
- You can track your shipment using the provided tracking number on our website or directly on the carrier's website.
5. Shipping Fees:
- Shipping fees will be calculated during the checkout process based on the weight of the package, destination, and selected shipping method.
- We may offer free shipping promotions from time to time, so make sure to check our website or subscribe to our newsletter for any ongoing offers.
- We are proud to offer international shipping to many countries worldwide.
- Please note that international shipments may be subject to customs duties, taxes, or import fees imposed by the destination country. These charges are the responsibility of the customer and may vary depending on the customs policies of the respective country.
6. Order Tracking and Customer Support:
- If you have any questions or concerns regarding your order, our customer support team is here to help.
- You can contact us through our website or email, and we will respond to your inquiries as soon as possible.
Please keep in mind that this shipping policy is subject to change without prior notice. We recommend reviewing our policy periodically for any updates.
VAT: 302055452400003
