Skip to content
Sort by:
AEM V3 Water/Methanol Injector Kit (Qty 2)
Replacement V3 Water/Methanol Injectors (Qty 2), Includes Interchangeable Swirl Generators for 250cc, 500cc, & 1000cc of flow for each injector
AEM VCU Universal LV Rear Harness
This low voltage harness assembly was designed to be installed in the rear half of the electric vehicle. It was designed to be used with a mating front half assembly...
AEM EV Tesla LDU Base Drive Inverter Control Board & Harness (MUST BE USED WITH VCU200)
AEM EV's Tesla Inverter Control Board acts as a VCU expansion device that replaces the stock Tesla ICB. Once connected to an AEM VCU using the supplied communications harness, calibrators...
AEM CD-7 Universal Flush Mount Panel 20in x 10in
Formed ABS Panel to allow for the flush fit of a CD-7 Display when used with supplied softmounts.Panel is 10" Tall and 20" wide and ideal for when fitting an...
AEM Power Harness for Wideband Gauge (30-4400)
Replacement Wiring Harnesses, Sensor Harness for 30-4400 Voltage Gauge
AEM CD Carbon AEMNet Power Adapter w/ Standard 12V Automotive Power Port Interface
AEM has made installing a CD Carbon Digital Dash Display even easier thanks to the 12V AEMnet Car Power Cable (PN 30-2227)! It powers a CD-5 or CD-7 Carbon Digital...
AEM CD-5/CD-7 Plug and Play Adapter Harness for 2016+ Yamaha YXZ 1000
AEM’s Plug & Play Adapter Harness (PN 30-2220) for 2016-up Yamaha YXZs works with CD Carbon 5- and 7-inch Digital Dashes (sold separately) and includes YXZ-specific screen layouts designed to...
AEM CD-7/CD-7L Plug and Play Adapter Harness for MSD Grid
AEM's Plug & Play CAN bus Communication Harness (PN 30-2213) eliminates the need to manually wire a CD-5 Carbon or CD-7 Digital Dash Display to the MSD Atomic TBI EFI...
AEM K-Type Thermocouple Wiring Extension Kit
K-Type Closed Tip Thermocouple 10-Foot Wiring Extension Kit, Includes 10 Feet of Wiring Extension, 2 X 4-40 Hex Nut, 2 X 4-40 Screw & 6-inches Heat Shrink Tubing
AEM 05-21 Toyota and Subaru Throttle Control Module
The AEM TCM (Throttle Control Module) instantly puts YOU in CONTROL. Get rid of laggy acceleration and dead pedal with an AEM TCM. Wirelessly program your own throttle curves with...
AEM DTM Style 4-Way Receptacle Connector Kit with 5 Female Pins
DTM-Style 4-Way Plug Connector Kit, Includes Plug, Plug Wedge Lock and 5 Female Pins
AEM CD-5 Universal Flush Mount Panel 20in x 10in
ABS Panel - Formed to allow for the flush fit of a CD-5 Display when used with supplied softmounts. Panel is 10" Tall and 20" wide and ideal for when...
AEM Main Harness for 30-0311 X-Series OBD2 Gauge
Main Harness for 30-0311 X-Series OBD2 Gauge (not for 30-0334)
AEM CD-7/CD-7L Plug and Play Adapter Harness for Holley EFI
CD-7/CD-7L Plug and Play Adapter Harness for Holley EFI Systems, Connects CD-7 Dash to Holley Dominator and HP EFI Systems
AEM GPS Replacement Antenna
10Hz Replacement GPS Antenna for use with AEM GPS-enabled Devices (GPS Speedometer,CD-5 Carbon Digital Dash Display, Vehicle Dynamics Module and GPS Module)
AEM K-Type Thermocouple Kit - Single
AEM offers a durable closed-tip RTD-type high temp sensor (PN 30-2052) and an inexpensive, fast-responding K-Type, closed tip thermocouple sensor (PN 30-2068 sold individually or in 2-or 4-packs).
AEM X-Series Volt Gauge Accessory Kit
X-Series Digital Gauges include new technological features that make them easier to use. Two buttons on the faceplate deliver programmability for peak/recall on the Volts gauge. All X-Series gauges are...
AEM Adjustable Fuel Pressure Regulator Barb Fitting -6 (9/16in-18) to 7mm - 5 Pack
Fitting, Adapter, AN to Hose Barb, Straight, Steel, Natural, -6 AN, 7mm Hose Barb, Pack of 5